top of page

Building a Waterfront Custom Home on the Saanich Peninsula and the Gulf Islands

Oct 20
9 min read
West coat house on the ocean

On a waterfront lot, one of your property lines is not a line at all. It is a mark the sea leaves on the ground, and the law lets it move. Everything else about building on the shore follows from that: how much of the lot is yours, where the house can sit, how high the floor has to be, who owns the beach and the dock, what is buried under the lawn, and what the salt will do to the hardware. A waterfront custom home on the Saanich Peninsula or the Gulf Islands is a different project from one in Broadmead, and the differences are decided before the drawings, not after.

This is what we look at when a client brings us a shoreline lot, in the order the answers arrive.


The line that moves: the natural boundary


The Land Act defines the natural boundary as "the visible high water mark" of a body of water, the line where the action of the water has left a mark in the vegetation and soil that is distinct from the bank above it. What sits below that line is Crown foreshore. A Crown grant of waterfront land does not include the bed or shore below the natural boundary unless it says so expressly, and the Province cannot dispose of that land except by Cabinet order. The beach in front of your house is not for sale, and never was.

The boundary also moves. The Land Title and Survey Authority's guidance is that a title bounded by the natural boundary gains land through lawful, gradual accretion and loses it through gradual erosion, and that eroded land returns to the Crown. Artificial fill does not move the line. On a Peninsula lot with a soft shore, this means the survey from the 1970s on file at the Land Title Office is a record of where the shore was, not where it is. A current survey by a BC land surveyor, with the natural boundary located on the ground, is the first drawing a waterfront project needs.


The dock, and whether it comes with the lot


A dock sits on Crown land, so it needs the Province's permission, and the permission does not always transfer with the sale. The Province's private moorage program (updated March 2026) grants a General Permission for an ocean dock if there is one dock per property, no fill below the natural boundary, no dredging, no solid cribs, insurance in place, and the site is not in an application-only area. Anything else needs a Specific Permission, with a $262.50 application fee and a modest annual rent.

The Southern Gulf Islands and southeast Vancouver Island have been the exception. New private moorage applications were paused there in 2021 and prohibited by ministerial order from August 2023, and that prohibition ended on March 31, 2026. FrontCounter BC is accepting new applications again, but the Province is finalizing a Strategic Management Plan for the area and has asked applicants to wait for it; the draft plan's consultation closed on October 18, 2026. If a dock is part of why you are buying, confirm what permission exists, in whose name, and whether the lot is inside the plan area before the price is fixed. Islands Trust committees also set their own dock rules island by island.


How far from the water the house can sit


The Riparian Areas Protection Regulation that governs streams does not apply to the ocean; marine setbacks come from each municipality's shoreline development permit area, and they vary.

Central Saanich requires a development permit for any new construction within 15 metres of the natural boundary of the sea, a 15-metre setback on rocky and beach shores, a vegetated zone averaging 15 metres over at least half the shore length, and a qualified coastal professional's report before any new hard shore protection. North Saanich's Marine Uplands and Foreshore permit area uses the same 15 metres, allows retaining walls only where a qualified professional finds natural revetment insufficient, and protects eelgrass on a no-net-loss basis. Metchosin sets 15 metres from mean high water on rocky shores and 60 metres on drift-sector beaches, with a separate 60-metre shoreland slopes permit area. On Salt Spring, the land use bylaw prohibits any building within 15 metres of the natural boundary of any water body, reducible to 10 metres with an engineer's certification that the shore will not erode. Oak Bay's 2025 community plan adds a shoreline permit area along a coast that sits "generally under 4 metres in elevation." Sooke's draft plan proposed a 15-metre buffer with a professional's report; Saanich and Sidney do not have a marine shoreline permit area that we could find. The number for your lot comes from your municipality's plan, and it is measured from the line that moves.


The floor level comes from the sea, not the road


Provincial guidance for coastal flooding, in force since 2018, tells local governments to allow for 0.5 metres of sea level rise by 2050, 1.0 metre by 2100 and 2.0 metres by 2200, and to set a flood construction level from the 1-in-200-year tide and surge, plus sea level rise, plus wave effects and freeboard. It also recommends a setback of at least 15 metres from where the natural boundary is expected to be in 2100. The CRD's coastal flood inundation mapping, published in 2021, models those scenarios shoreline by shoreline with a 600-millimetre freeboard.

How each municipality has applied this differs. Sidney has an interim policy: any habitable structure below 5.0 metres geodetic needs a professional engineer's report, with a backshore flood construction level of 4.12 metres, and the Town published flood construction level mapping in December 2025 that is not yet a regulatory requirement. North Saanich drafted a Coastal Flooding Mitigation Bylaw in 2018 and deferred it; flood construction levels for 39 shoreline reaches exist in the District's study. Victoria, Saanich and Central Saanich have no adopted coastal flood construction level that we could find, which means the engineer's report, not a bylaw, sets the floor on those shores. For the house, a flood construction level often means the main floor sits higher than the lot wants it to, which changes the entry, the garage, the view from the living room and the retaining walls. It is a design decision that belongs in the first sketch.


Bluffs, septic and wells near the shore


A bluff lot adds a geotechnical setback to the shoreline setback. There is no single provincial number; a 2022 study for the Cowichan Valley projected the crest of a bluff forward using an angle of reach, one metre of sea level rise and a 15-metre allowance for toe erosion, then recommended a qualified professional's assessment inside that line. Colwood's draft shoreline rules use three times the bluff height on eroding bluffs. Metchosin uses 60 metres. On a bluff, the engineer's report decides where the house, and the septic field, can go.

Septic on a waterfront lot carries its own setbacks: 15 metres from the sea at mean high tide, 30 metres from a well, and more where the ground is poor. A well near the shore has a risk the city does not: saltwater intrusion. The Province's advisory for the Southern Gulf Islands recommends not drilling within 50 metres of the coast and no hydrofracturing within 100 metres, and sets chloride, conductivity and dissolved-solids thresholds that a water test should check. The Water Sustainability Act prohibits operating a well that causes saline intrusion, which is to say the problem is yours to prevent, not the Province's to fix.


What is under the lawn


The Peninsula and island shorelines are where people have lived for thousands of years, and shell middens sit exactly where the view lots are. The Heritage Conservation Act protects any site with evidence of use before 1846 whether or not it has ever been recorded, alteration without a permit carries fines of up to $50,000, and the property owner pays for the archaeological work. An Oak Bay owner on Willows Beach spent close to $6,000 on an inspection and about $51,000 on hand excavation before a court ruled the Province could not require her to pay for the inspection. On a waterfront lot the archaeology check is not optional: a free data request through the Province's portal, then an archaeologist's overview or field reconnaissance before any design is committed. Where a midden is confirmed, the setback the shoreline rules already impose is often where the site sits, and the design works around it.


Salt, wind and the hardware that lasts


A house on the strait is built to a different exposure than one a kilometre inland, and the building code accounts for it in two places.

Windows. Window performance grades in BC are selected under the Canadian Supplement to the North American Fenestration Standard, updated in a 2025 edition, and the simplified method only applies on level terrain; a bluff or hillside lot needs an engineer's wind calculation. Victoria's climatic data gives a 1-in-50 hourly wind pressure of 0.57 kilopascals and a driving-rain wind pressure of 220 pascals; in open terrain that converts to a design pressure in the order of 1,600 pascals, and inspectors in this region have required higher grades than a calculator suggested. Water-penetration test pressures on coastal sites can run well above the standard fraction of design pressure. Specify the grade from the calculation, not the catalogue.

Fasteners and connectors. Salt spray concentration drops sharply between roughly 100 and 1,000 metres from the shore, which is why connector manufacturers distinguish between inland and coastal grades. Type 304 stainless is not suited to many coastal settings; Type 316 is the recommended grade for high-chloride environments, and the stainless connectors used in framing hardware are 316L for that reason. Galvanized hangers on a bluff house are a ten-year problem waiting to appear.

Cladding and envelope. The right cladding for a salt exposure is a durability decision, not a style one, and the detailing, the rain screen, the flashings and the sealants matter more than the material's name. Victoria is also a high-seismic zone, and the 2024 building code brought forward seismic provisions for houses here; a waterfront house with large glazed walls to the view needs the structure designed around those openings, not drawn and then braced.


Getting there: the Gulf Islands


On the islands the rules add a layer and the logistics add another. The Islands Trust sets zoning, permit areas and variances through each island's local trust committee and reviews every building permit for zoning consistency; the CRD inspects and issues the permit for Salt Spring and the Southern Gulf Islands, with a $300 application fee, a permit fee of 1.4 per cent of construction value, a four-week review target and a 12-month lapse if work has not started. Proof of potable water, an Island Health sewerage filing and an archaeology confirmation are on the CRD's checklist. The CRD electoral areas require Step 3 of the Energy Step Code with Zero Carbon Level 3.

Then there is the barge. BC Ferries has reported construction loads of 60 tonnes and more exhausting the weight allowance of Salish-class sailings to the Southern Gulf Islands, which is why concrete, structural steel and a framing package often go by barge, and why the schedule on an island is written around the tides as much as the trades. We have built on islands with no ferry, no grid and no dock. The finish is the same as it would be in Sidney. The logistics are not, and we plan them before we price.


Bring the shore to a builder before the price is fixed


Most of what decides a waterfront house is decided by the lot: the boundary, the setback, the floor level, the bluff, the well, the midden, the dock. Each has an office or a professional who can answer it, and the order you ask them in sets what the answers cost. If you are looking at a shoreline lot on the Peninsula or the islands, we will walk it with you before you buy and tell you what the house will have to be.


Questions we're asked


Do I own the beach in front of a waterfront lot? No. Below the natural boundary is Crown foreshore. You own to the visible high water mark, and that mark can move with erosion and accretion.

Does a dock come with the property? Only if the permission does. A General Permission attaches to a qualifying dock; a Specific Permission or a lease is in the owner's name and has to be confirmed and transferred. In the Southern Gulf Islands, new applications only reopened on March 31, 2026.

How close to the water can I build? Fifteen metres from the natural boundary in Central Saanich, North Saanich and on Salt Spring; 15 to 60 metres in Metchosin depending on the shore; and in several municipalities the number comes from an engineer's or environmental professional's report rather than a bylaw.

What is a flood construction level? The minimum elevation for habitable floors, set from the 200-year tide and surge plus projected sea level rise and freeboard. Sidney's interim trigger is 5.0 metres geodetic; elsewhere the engineer sets it.

Will a shell midden stop the build? Rarely, but it will change the siting and add an archaeologist to the team. The data request is free; the assessment is not. Doing it before design is the difference between a design decision and a stop-work order.

Why do you specify stainless hardware on the water? Because galvanized connectors corrode in salt air and the failure is inside the wall. Type 316 stainless is the grade for coastal exposure.


Start a conversation


Tell us where the lot is and how it's reached. We'll tell you what building there involves before you commit to anything.



It's time for a home

built around you. 

Uncompromising Craftsmanship Since 1998

bottom of page